Wire hooks, connected by a welded wire.
These belt buckles have proven themselves in over 50 years as a „safety hook“ in drive belts and conveyor belts. The welded wire stabilizes the connection zone and prevents the hooks from breaking out. Particularly suitable for use on tires in agriculture and in the food industry.

A30 belt connector series:

• Is especially suitable for use with thin tires, e.g. on filter belts and on machines with PTFE-coated belts.
  
• Wire diameter 0.80 mm; pitch 2.54 mm; strip length 300 and 600 mm; band thickness up to 2.5 mm; from a roll diameter of 50 mm.
  

• Is especially suitable for use with very thin belts and belts, e.g. in laundries.
• Wire cross section 0.90 x 0.60 mm; pitch 2.54 mm; strip length from 35 mm adapted to the width of the belt; band thickness up to 2.0 mm; from a roll diameter of 50 mm.
  

Is especially suitable for use with very thin tires. Wire cross section 0.90 x 0.60 mm; pitch 2.54 mm; strip length 150, 300 and 600 mm; band thickness up to 2.0 mm; from a roll diameter of
50mm.

• Is especially suitable for use with a wide spectrum of belt thicknesses, e.g. on filter belts and on machines with PTFE-coated belts.
  
• Wire cross section 0.90 x 0.60 mm; pitch 2.54 mm; strip length 300 and 600 mm; band thickness up to 4.0 mm; from a roll diameter of 25 mm.